Fast Without Dust
The Makita LC1230 cutting saw represents the ultimate comfort, reliability, and quality like any other tool made by this manufacturer. The top performance, maximum user safety, and impeccable result – that all is Makita. First of all, we would like to mention a superb hard-strength alloy blade of this tool. It easily cuts through an object just like a knife through butter. The whole process takes seconds and there are neither dents nor notches on the cut edge. Therefore, there is no need for further grinding or finishing. The replacement of the blade is effortless as a special wrench is supplied with the saw. You can do that with one hand. We would like to mention other convenient features like the well-thought-out design of this tool. An item you are going to cut is reliably fixed between two clamps. A sawing angle is adjusted with the help of a lever with marked positions. Also, there is no abrasive dust when the saw is running. Metal chips and shavings are collected in a special waste system that transfers them to the rear side tray. All parts of the saw are well greased by the original high-quality grease. It will not harden till the temperature is above 14° F. A few words about safety: at first, the blade is covered with a metal lid protecting you from any accident, and at second, there is a trigger lock preventing an accidental start. The package includes protection glasses which are mandatory when you use a cutting saw.
Conclusion
You will never find a poor-quality Makita tool. This cutting saw represents another evidence to this fact. It fulfills any task 4 times faster than any other cutting saw. It is maximally safe in use and does not leave piles of waste afterward. Another advantage of this tool is the cold cut technology. You can actually touch the place you've just cut! It means you can easily handle stainless steel and other metal materials. This tool is a dream of any professional.
More Products to Consider
The Cutting Fluid can be used on all metals. It extends the lifespan of the cutting blade and makes cutting smoother.
Additional Info
| Last updated price | $519.00 |
| Stock | In stock |
| ASIN | B00004YOLV |
Strong Motor in a Small Body
The Milwaukee 2682-20 M18 metal saw is a wonderful tool that combines both compact size and top quality. No worries about the length of the extension cord since this saw is battery-powered. It can be carried anywhere you need. There are almost no sparks during the usage of the tool and almost no vibrations are felt. The soft rubber grip adds to the overall positive impression about this chop saw. You feel no discomfort using this handheld tool since the extra front handle helps control the tool ensuring a secure grip. The tool features a 4-pole frameless motor. This metal saw easily cuts metal sheets up to 3/4'' thick, 1/2'' L-bars and 5/16'' steel plates. The tool features multiple useful functions. A convenient lever allows you to adjust the cutting length in the range of 1/8'' up to 2''. Another useful feature is the LED light that helps a lot in low light conditions. The safety of operation is assured by the trigger lock preventing any accidental start of the chop saw. The blade has a protection casing.
Do You Know?
The first prototype of a saw, which is a common tool today, was invented over 4000 years ago. At that time it was a piece of stone dented on one side. It was used for cutting wood, bones or soft stone. In general, they were sharpened against the sharp angles of rocks. Such saws were used by many ancient sculptors when they created statues of gods. Ancient Egyptians and Babylonians already used copper saws. They could even cut stones if the sawing point was covered with some abrasive substance beforehand. The first iron saws were made by Scandinavians who cast them in molds. Though the quality of these saws was rather poor and they were less effective compared to axes. It took centuries till people started to make forged saws. Th first saws of this type were made by blacksmiths in Greece. Such saws were durable and of a relatively good quality. They could fulfill many necessary tasks if sharpened properly.
More Products to Consider
Milwaukee Heavy Duty Bag will be useful for transportation of your tools.
Rechargeable Battery is a must accessory to use together with this saw.
Additional Info
| Last updated price | $299.00 |
| Stock | In stock |
| ASIN | B004M8R9X2 |
Powerful and Convenient Tool
The DeWALT D28710 tabletop abrasive chop saw will be a great assistant for cutting multiple metal items. It is easy to use and has a sufficiently powerful motor. Though this tool doesn't leave a flawless cut, it's more than enough for chopping lots of materials that don't require the utmost precision. This DeWALT chop saw is very simple in use - you just clamp the item you need to cut with the help of the Quick-lock vise - and do a quick cut. It's possible to adjust the cutting angle (45° in both directions), too! The convenient D-handle helps you control the saw. The handle isn't rubber coated but provides a firm grip due to an ergonomic design. Thus, you won't get tired even if you operate the tool for several hours in a row. Another convenient feature is the compression spring - it makes the saw operation very smooth and pretty accurate. In all, this saw leaves a very positive impression and any professional worker will surely like it!
We would also mention some extra pros of the tool. For example, there is a special compartment for a hex nut wrench used for the blade replacement. So, you will never lose the wrench! The motor runs very smoothly. Moreover, it's well protected from abrasive dust and resistant to overloads. The manufacturer did its best to ensure the long lifespan of this saw. The blade is under a protective screen to prevent any sparks flashing in your face. Anyway, we recommend being very careful if you work with abrasive materials. At least, do not start working with such tools without protection glasses and working gloves.
Interesting Facts: History of Mechanical Saws
A human attitude to forestry and wood processing changed completely in 1322 when the first mechanical saw was invented in Germany. The first sawmills were water-powered and built on river banks. Later, such mills appeared in England, Scotland, and other places. Yet, there was another side of the coin - lumberjacks felt they couldn't compete with mechanicals saws and, thus, they lost the money. Therefore, they started to destroy sawmills. By the way, this way the first American steam sawmill was ruined too and exactly for the same reason!
The next step in the human progress towards the invention of a metal saw was a band saw. It was a steel band with one toothed side. This construction was patented in England by William Newberry in 1808. 40 years later, in 1846, Anne Paulin Crepin from France created and patented a welding technology that improved the band saw. The first American patent for the band saw was granted to Benjamin Barker from the state of Maine in 1836. For many years manufacturers failed to connect the two sides of the band saw but only at the end of the 19th century they succeeded to weld them for reliability. Since then, such saws have been widespread.
More Products to Consider
The Original DeWALT Chop Saw Wheel will help you cut metal objects.
Additional Info
| Last updated price | $0.00 |
| Stock | May be out of stock |
| ASIN | B00551DJBQ |
Powered by AC and DC Current
This saw is sometimes rated as one of the best tools for processing metal. It will easily handle concrete blocks, reinforced concrete and bricks. You only have to use appropriate abrasive cutoff wheels for different materials. It is no wonder since the saw features a powerful high-torque motor. The Hitachi CC12Y cut-off saw, just like other tools of this type, requires a relatively frequent replacement of wheels. Yet, it isn't difficult at all - you just need a wrench which comes with the saw. In general, this tool features a wonderful technical specification and is comfortable in use. There is also an auxiliary handle for a better control of the saw during the usage. It should be mentioned that the saw is equipped with the auto-stoop carbon brush. It substantially increases the lifespan of this tool since it uses the low spark. We have to recognize one more distinctive feature of this chop saw: it's compatible with both AC and DC current. Therefore, you can use the tool at any construction site!
Safety Rules for a User
Since any saw is a potentially dangerous tool, we strongly recommend you to follow some safety rules:
- always wear protection glasses
- don't use the tool near flammable materials
- check the cutoff wheel for cracks or damages since a cracked disk must be replaced immediately
- clean the processed object from shavings and other debris for the safety reasons
- avoid places on the cut object with nails in them
- hold the tool firmly and don't press the wheel to the object before starting the motor
- never touch the wheel when it rotates
More Products to Consider
This Marker is created for making marks when cutting metal items.
Additional Info
| Last updated price | $826.86 |
| Stock | In stock |
| ASIN | B00004T7Y4 |
Fantastic Quality
Evolution Power Tools built a unique saw in its class since it can cut any rough material effortlessly. If you need to cut 4'' concrete, brick or stone - this disc cutter will easily handle it! The tool cuts through a concrete wall incredibly fast. The manufacturer promises that the cutter will easily handle even a reinforced concrete. It's necessary to admit that the tool is really powerful. This Evolution model has a great 12” diamond disc that leaves no cracks on the objects it cuts. You always get a clean and clear cut. One more benefit of this tool is a possibility to hook a vacuum cleaner to it. There's always a lot of dust during the cutting of concrete but you can use a vac to capture it. The disc cutter features a comfortable soft grip and an auxiliary handle for better control. The safety guard is fully adjustable, making the tool easy to carry and use both in horizontal and vertical positions. Another convenient feature is the spindle lock thanks to which you can replace the disc in a matter of minutes. Try this chop saw ones and you will realize it's worth every single dollar it costs!
History of Evolution Power Tools
Although Evolution Power Tools was founded not so long ago, it is quite a successful company. Actually, the company is considered to be a leader in the market of disc saws for dry metal cutting. Evolution Power Tools was founded in 1992 in the largest industrial center of the Great Britain, Sheffield. Originally, the company's name was Hitech Evolution Europe and it was a distributor of tools of other brands. But in 1999 it started producing its own metal processing tools. Since then the company has thoroughly worked on the development and expansion of its product range. The company produced magnet drilling machines and many other tools. In 2002, Evolution Power Tools opened a plant in the USA which is now manufacturing the same products as the main factory in the UK. The company launched the production of the multi-purpose RAGE saw that became a revolutionary product. The unique advantage of this tool is its ability to cut various materials including aluminum, steel, and wood with the same disc. In 2007, the company changed its name to Evolution Power Tools.
More Products to Consider
Get this Diamond Disk if you need to cut the toughest materials.
Additional Info
| Last updated price | $249.99 |
| Stock | In stock |
| ASIN | B003K4FQ6G |
What is a Chop Saw
Cutting or chopping the metal isn't an easy task without a special tool called a chop saw. It allows you to accurately cut metal items at an angle (up to 90°) or at an incline. Chop saws can easily cut such materials as aluminum, laminated board or plastic. These tools are particularly useful when you need to cut metal materials. Chop saws use abrasive blades while circular saws have conventional blades. Abrasive blades can cut metal objects without any jams.
Of course, any construction requires lots of other tools. For example, if you need to fix something securely with nails, we recommend you to look at our reviews of the Best Nailers. And no doubt, any housekeeper should have a reliable Cordless Drill.
What Features to Compare
Type
If you want to choose a decent chop saw, you should understand certain technical features of such tools. First of all, you should clearly realize what exactly you are going to use a chop saw for. These tools are either handheld or tabletop. Handheld saws are more convenient if you plan some short-term works and need to keep the tool in your hands. Tabletop saws are more useful if you work in a workshop, for instance, and need to cut a multitude of materials. No need to mention, tabletop chop saws are more accurate as you can adjust the angle before cutting.
Technical Specification
When you select a chop saw, the priority should be given to the motor power. The more powerful the motor, the more easy-to-use the tool. Another important feature is the blade diameter since it determines the cutting depth. You must remember that it is not recommended to replace the original blade with a larger one since it can negatively affect the engine operation. Also, don't forget to check out the arbor diameter so that a blade fits a chop saw. There's another important feature to pay attention to and it's the rotation speed. Working with tough materials, you should pick a saw with a high rotation speed as it will cut more accurately. However, for performing simple tasks, such as cutting some metal items, the high rotation speed is not as important as the engine power.
Convenience
Using a chop saw gets a lot easier if it has some convenience features which include a sawing angle adjustment on tabletop tools and a blade speed control, for instance. Some chop saws even boast certain unique technologies! We recommend you to consider the position of handles of a chop saw - they must be convenient and provide a firm grip. Also, don't neglect safety as the blades for chop saws are sharp and potentially dangerous to a user. That's why a good chop saw must have a protection cover and its handles have to provide a convenient and firm grip. Finally, we would like to highlight the importance of a trigger lock that prevents an accidental start of the tool.
How to:
Sources:
1. Wade Shaddy Miter Saw Vs. Chop Saw, eHow.
2. How to Use a Circular Saw: Long Cuts, The Family Handyman.
3. Chop Saws Buying Guide, eBay. March 3, 2016.
4. How to Use a Steel Chop Saw, wikiHow.
5. How to Use an Angle Grinder, The Family Handyman.
6. Terry Tuerk Angle grinding 101, TheFabricator. July 8, 2013.