Best Plasma Cutters for Flawless Cuts

Now, let's see what this cutter can really do… The Auto-Line™ and MVP™ technologies provide connectivity to 120V or 240V electric power networks without additional converters. Using the inverter, the machine generates 15А to 30А current with the maximum amperage achievable only using the 240V power source. Consequently, having switched the machine to the maximum performance mode, you'll be able to cut 5/8" thick soft metalware at 6 IPM. The 20А power will let you cut through up to 3/8" thick pieces at the same cutting speed. As for the minimum cutting width, the machine cuts 16GA sheets at 20А and 12GA pieces at 30А. The cutting speeds are 158 and 105 IPM respectively. As you can see, a compact size doesn't affect the cutter's performance, so you can freely handle materials of different thicknesses. The duty cycle is 35% for 20А/120V and 30А/240V. When setting the machine to 22А/240V, you can cut without interruptions for cooling the tool down. We were quite surprised by the plasma flow rate, which is as high as 5.0 scfm at 90-120 psi for such a small unit.

Now, let's sum up the key advantages of the Spectrum® 375 X-TREM

To make the use of the tool comfortable, there's an automatic air supply pressure adjustment feature that ensures smooth cutting under any electric load. Also, it has a thumb groove and a XT30 torch with a nonslip coating and flexible hose for maneuverability. Aside from that, the Spectrum® 375 X-TREME is designed with the Wind Tunnel Technology™ and Fan-On-Demand™ - two major technologies that ensure effective protection of the internal components of the tool from ingress of dust and dirt.

Using the tool is as easy as anything, thanks to the Auto-Refire™ feature that not only boosts its performance but also minimizes strain in your hands. In addition, this feature made it possible to cut perforated metal and grates simply by switching the tie point of the pilot arc from inside to outside part as fast as required, so you don't have to trigger the machine again and again.

Finally, if you're planning to use a plasma cutter on sites, you'll be pleased to know that it comes in a sturdy plastic case, offering ample storage space for both the tool and accessories.

To wrap up, this model is a wonderful choice for people handling thin materials and looking for a compact and easy to carry around plasma cutter.

The FLARING lets you save up on the energy bills – and doesn’t bother you with noise. Yes, this cutter is on the heavier side, but it’s nothing critical. You’ll love the high speed of this machine that’s faster than a touch arc plasma cutter. Reaching 40,000 °F in a flash, it pierces through the material like a champ. Need a 110V adapter for the job? No worries, as you’ll have it in the package.

Not only is this unit effective, but also extra safe, giving you the well-deserved peace of mind. It features the built-in overheat and overvoltage protection. If you want to be on the extra safe side, keep the machine running for 10-15 minutes after the cut to further cool it down. This will extend the cutter’s lifespan, and you’ll be using your new favorite tool for a longer period.

Great, but what about the stability? The machine comes with 4 rectifiers and 3 large capacitors of high power, which boosts this quality.

All in all, the plasma cutter by FLARING is fit for personal and commercial projects, allowing you to cut metal quickly and without effort. It makes a great practical present to a DIY fan or design artist.

Now, let's cover this cutting machine's capabilities.

To start off, the machine features an inverter that delivers the amperage ranging from 10А to 50А. The LTP5000D can be powered from both 110V and 220V electric sources and cut materials of various thicknesses.

For example, when powered from 35А, the cutter is able to cut metalware from 16 to 26 GA at 360 and 225 IPM, respectively. This makes it perfectly suitable for various jobs, from maintenance of an old car to repair of farmstead machinery, and so on. Yet, some metal parts may be too small for the cutter, and you may need to use an angle grinder for further processing.

Overall, with the 60% at 50А duty cycle and airflow of 3.6 scfm at 65 psi allow, this cutter can put many other more expensive tools to shame.

To elaborate, we'd like to draw your attention to the pilot arc that allows you to cut perforated metal parts and even grid without the need to release the trigger. Also of note is the fact that a minimum of what the tool can deliver is 10A current, which makes suitable for processing thin metal pieces.

And if you worry about overheating, don't fret. Whenever the unit runs for too long, the LED light will start to flash, and the tool will cut out automatically while the built-in fan will continue to work, cooling the components of the tool.

All in all, if you're seeking an affordable machine that will be suitable for home-based tasks and then some, the LTP50000D can be the best choice. It's easy to use and can give even some more advanced tools a run for the money.

Guess what? You can add an extra generator to your Reboot plasma cutter. Reinforce the tool with a 5000W above unit as well as a 30A/50A breaker. Up your metal cutting routine with more power – and more efficiency.

Worried about the overheating? You shouldn’t be with this machine. The Reboot starts the pre-made 3-second blowing time when the torch is released. This helps cool down the head of the cutting torch and the consumables; which, in turn, expands the lifespan of this cutter. Buy one and forget all about the costly replacements.

While this machine doesn’t come packed with extra features, this accounts for its simplicity in use. You don’t have to be a certified professional to start working with this device. Assembling the unit is also simple if you stick to the instructions. All in all, this cutter gives you a real value for money without being overpriced.

Finally, to the regulator; the Reboot features an updated one that is well-sealed, doesn’t allow air leakages, and boasts long service life.

In conclusion, this plasma cutter is a great find for beginners as well as experienced pros. It gives you quality and all the basic features you’ll need for a successful project.

The input voltage for this unit is 115/230V, with the maximum current of 35Amps under 115V / 40Amps under 230V. The clean cutting thickness is 4mm and 8mm correspondently. Work through the plates with ease and comfort, bringing your project to success.

The hynade comes with a handy current LCD display placed right at the front of the unit. The current knob is easy in use, and the post air time can also be adjusted. It’s easy to get the instant readings for this device – and not become distracted from the job.

Yes, the instructions for this unit could be somewhat inaccurate, but apart from this drawback, the hynade is a user-centric cutter. Experienced workers as well as beginners can use it without an extensive learning curve. If you’re planning to give it away as a present to a friend or a coworker, be sure that the feedback will be positive. Those practicing artistic design will also appreciate having a reliable, effective cutter at their workshop.

Overall, the hynade plasma cutter is user-friendly, works for multiple purposes, and doesn’t come with a too heavy price tag.